| Title |
Publisher |
Price ▲ |
Office Desk (3D Printing STL File)
A very standard looking office desk for modern, cyberpunk, zombie outbreak, or post apocalypse type settings.
Recommended Print Dimensions: 50x21.5x19mm
Here's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer), Hatchbox 1.75 PLA. Please note that these settings print very... [click here for more] |
Fishwife Games |
$0.60
|
Firetoken for Tabletop or Boardgames ... [click here for more] |
3D-Druck-Gayer |
$0.65
|
Mutant Plant (3D Print STL File) A large, sickly mutant plant perfect for your apocalyptic wastelands, alien landscapes, or bizarre fantasy environments. Default size settings are 50x50x33mm. ... [click here for more] |
Fishwife Games |
$0.65
|
Spike Trap (3D Print STL File) A simple set of spike rows set in a square block for the construction of spiked pits. The STL file is preset with the following dimensions: 32x32x24mm. Please adjust to fit the scale you need in the slicing program. ... [click here for more] |
Fishwife Games |
$0.65
|
Trap Door (STL 3D Printing Model File)
This rough wood trap door is a good addition to dungeon settings, grim manors, weird pirate ships, etc. Just place on the floor of the dungeon and you are good to go. Could also be propped up (and resized) to make a regular door if you like.
The preset dimensions for this file is 34x32x8mm. Feel free to adjust it as needed when you load the... [click here for more] |
Fishwife Games |
$0.65
|
Work Bench (3d Print STL File)
This 3d print file is miniature prop terrain piece resembling a utility work bench. Perfect for a modern garage, work shop, factory, etc. as well as for super hero lab, cyberpunk, and even sci-fi settings.
Default STL File Dimensions: 74x24x38mm Need help or recommended print settings? These are slow but here's what we often use in Cura with our Ender 3 and Ender... [click here for more] |
Fishwife Games |
$0.65
|
Festering Refuse Heap (3D Print STL File) A filthy, foul pile of waste, refuse, and debris, complete with fungal growths and bone sticking halfway out of the mess. This 3d print file is perfect for adding a bit of ready made refuse to that dungeon. Default size settings are 56x33x13mm. ... [click here for more] |
Fishwife Games |
$0.70
|
Loveseat (3D Printing STL File)
A very standard piece of furniture. Perfect for modern, retro-modern, cyberpunk, near future dystopia, post apocalypse, super hero, and other related settings.
Recommended Print Dimensions: 22x42x22mm
Here's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer), Hatchbox 1.75 PLA.... [click here for more] |
Fishwife Games |
$0.70
|
Included is a 2x2 castle floor tile with the secret door wall base from DRAGONLOCK Ultimate: Dungeon Expansion Set 1.
In order to use this product, you will need to own one of the Wall_Secret_Top files from DRAGONLOCK Ultimate: Dungeon Expansion Set 1, which can be found here:
https://www.drivethrurpg.com/product/170650/DRAGONLOCK-Ultimate-Dungeon-Expansion-Set-1
DRAGONLOCK... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Your king not satisfied having castle walls the same height as all the other kings? No problem. This tall wall is roughly 77.7mm high. Make your castle stand tall!
EDIT: Added a matching corner wall. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
CRYPT CLASSICS™ is a line of supportless classic fantasy inspired miniatures and scatter terrain. These new sculpts harken back to the days of the dawn of fantasy tabletop gaming and will add a touch of historical nostalgia to your tabletop. All sculpts are optimized for FDM 3D printers and print WITHOUT SLICER SUPPORTS!
... [click here for more] |
Fat Dragon Games |
$0.99 $0.74
|
DRAGONLOCK™ Miniatures are hyper-detailed sculpts specifically designed to be the easiest printing miniatures you can buy for your 3D printer, and they print with NO SLICER SUPPORTS! Best of all, a standard mini costs UNDER TEN CENTS to print, and we support our 3D printer products with a complete Youtube video series that teaches you how to print at home like an... [click here for more] |
Fat Dragon Games |
$0.99 $0.74
|
DRAGONLOCK™ Miniatures are hyper-detailed sculpts specifically designed to be the easiest printing miniatures you can buy for your 3D printer, and they print with NO SLICER SUPPORTS! Best of all, a standard mini costs UNDER TEN CENTS to print, and we support our 3D printer products with a complete Youtube video series that teaches you how to print at home like an... [click here for more] |
Fat Dragon Games |
$0.99 $0.74
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and... [click here for more] |
Fat Dragon Games |
$0.99 $0.74
|
DRAGONLOCK™ Ultimate an interlocking terrain system that allows you to create fully modular, multi-level 28mm scale dungeon terrain for your RPG or wargame on your home 3D printer. Individual pieces links to neighboring pieces with our exclusive Dragonbite™ clips. Each set is delivered as a downloadable .stl file, and once you have the set, you can print as many pieces as you like and... [click here for more] |
Fat Dragon Games |
$0.99 $0.74
|
This floor piece can be used with the FDG0166R_Floor_Trap_Door and FDG0166R_Floor_Trap_Door_Frame (from DRAGONLOCK Ultimate: Dungeon Expansion Set 3 - linked below) to create a trap door using the Dragonshire stone floors.
In order to use this product, you will need DRAGONLOCK Ultimate: Dungeon Expansion Set 3, which can be found here:
https://www.drivethrurpg.com/product/178364/DRAGONLOCK-Ultimate-Dungeon-Expansion-Set-3... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Dungeon floor with a post in the middle. FDG Dungeon Starter and Expansion 7 have other versions of this tile. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Curved wall with castle floor. Done at Julie Hanson's request. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Make your combats more epic!
Rising and falling battlefields are the herald of great movie battle scenes. But when you've got a flat base on a miniature, they tend to fall flat (or down the stairs).
The included adapter allows large-based miniatures to hold their ground on the stair cases present in the majority of Fat Dragon Games' amazing sets. Included pictures showcase the Dungeon... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Rural Roads
A collection of 3D tiles depicting rural roads suitable for your modern, post-apocalyptic, and sci-fi for RPG and tabletop games. Tiles are designed to be printed on FDM printers with 0.4mm nozzle using the Fat Dragon Games dungeon terrain Ender 3 profile. Road sections come with variants to accommodate traffic signs and stop lights.
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Gravestone for Tabletop or Boardgames ... [click here for more] |
3D-Druck-Gayer |
Pay What You Want
|
Alien Dollhouse: Martian TV (STL Model file) This stl 3d printing model file is the first of the Alien Dollhouse series of retro-futuristic looking stuff. Scaled for 28mm to 32mm figures, this item can be easily resized to whatever scale you wish when you run the file through your favorite 3d printing slicing program. The current dimensions are: 13x11.5x28mm. Though having a funky, old school cool... [click here for more] |
Fishwife Games |
$0.75
|
Alien Monument (3D Printing STL File):
This simple looking sculpture is perfect for propping up an alien monument. What is this bizzare, monolith like object? Is it a landmarker, a historical connection to some great event, or is it a piece of seemingly dormant technology from long ago? Let your GM decide! Default printing size settings are: 28x27x47mm, making the piece (by default) a fair bit taller... [click here for more] |
Fishwife Games |
$0.75
|
Basic Crate (3d Printing STL File)
This file is a simple, easy to print storage/shipping crate that is kept intentionally very basic in design. Purposefully generic in appearance to allow mass placement or to add whatever post printing details you desire. Good fro many settings- from fantasy to pirate to modern.
Pay as you want- suggested selling price if you wish to pay is a mere... [click here for more] |
Fishwife Games |
Pay What You Want
|
Bed Mat: 4 Versions (3d printing STL file)
This product contains 4 versions of a simple bed mat with blanket and pillow. Three have patched up blankets while one does not. The default size settings for these files are: 23x39x5mm. Feel free to change this size to suit your needs in your slicing program. ... [click here for more] |
Fishwife Games |
$0.75
|
I needed a way to add variety to my cavern waterways. Included are two diagonal cut water tiles, one a bit more narrow than the other. Enjoy! ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
If you have Fat Dragon Games Village sets and you need to make REALLY BIG room areas then these are the solution for you!
These double pillars allow you to use D-Walls to run walls along two 4"x4" using adjacent pillar holes (just as C-Walls do). The pillars have double prongs that are inserted into corresponding corners of adjoining tiles as shown in the image.
The Stone pillar projects assymetrically... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Dragonbite Clip Removal Tool!
Tired of damaging your clips and fingers? Try this Dragonbite clip removal tool!
Prints in about 15 minutes when printed with FDG terrain profile on Ender-3.
New addition! Version 3 has a wider handle with a textured grip. A slip on handle can also be printed for extreme clip removal!
These are the clips used:
https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Andrew Callaghan requested a wood floor version of the FDG Dragonshire Building 2 Bumpout. Here they are for bumpout A, B and C. Requires Fat Dragon Games Dragonshire Building set
Dragonshire Builing Set 1:
https://www.drivethrurpg.com/product/324779/DRAGONLOCK-Dragonshire-Building-Set-1?affiliate_rem=553084
Dragonshire Building Set 2:
https://www.drivethrurpg.com/product/324781/DRAGONLOCK-Dragonshire-Building-Set-2?affiliate_rem=553084... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Welcome to the Gaping Portal Tavern, the most famous Tavern in Waterdrop City, where you can have an Ale and muster up your courage to get lowered down into the well (to have a drink of water maybe?).
This piece needs to be printed four times to get a 10"x10" Tavern floor section with an 8" wide well hole in the middle. The walls are 22mm high off the base giving an impression of being just above... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Fat Dragon Games' 3D printable mini painting holders are great — but they don't grip hex-base minis, or the circular Heroforge bases, as well as they could. This set of alternate slider models is compatible with the standard FDG mini painting handles, but gives a bit of extra grip.
Slider-grips for 1", 1.5", and 2" minis are included. This product requires the handle and base models from Fat Dragon... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Hologram Dancer (3D Printer STL File):
Orbital space ports can be a rowdy, yet lonely place. In the filthy bars full of space marines, star truckers, sleazeball smugglers, and cosmic destitutes is a static ridden form of electronic entertainment... hologram dancers. Controlled by electronic devices mounted on the floor, these lonely travelers can entertain themselves by watching a 3d projection of... [click here for more] |
Fishwife Games |
$0.75
|
A elevated to lower waterfall transition requested by Jeff Kazules. May be more added to this in the future. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a 160 x 40 mm round Dice tray for the GM Screen of DOOM you will need to down load the dragonbite clips here https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30 ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a 100 X 88 X 35 mm Dice Tray for DRAGONLOCK Ultimate: GM Screen of DOOM with the inside made smoot by request for Bill Buchalter.
Download the free DRAGONBITE™ Clip model here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30?manufacturers_id=346/product/206435/DRAGONLOUltimateDragonbiteTM-Clip-v20
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a 100 X 88 X 35 mm Tray for the DRAGONLOCK Ultimate: GM Screen of DOOM link is https://www.drivethrurpg.com/product/251695/DRAGONLOCK-Ultimate-GM-Screen-of-DOOM?src=hottest_filtered
Download the free DRAGONBITE™ Clip model here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30?manufacturers_id=346/product/206435/DRAGONLOUltimateDragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a custom mashup of the Dragonlock Dungeon narrow hallway, and the Castle interior stairs to create a staircase that fits neatly among other tiles. It's particularly useful for basement stairs.
The original source models are available in the following sets:
https://www.drivethrurpg.com/product/277443/DRAGONLOCK-Ultimate-Castle-Starter-Set
https://www.drivethrurpg.com/product/170650/DRAGONLOCK-Dungeon-Expansion-Set-1... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Post Modern Desk (3D Printing STL File)
A funky looking desk in a post modern style. Good for modern settings, super hero, cyberpunk, etc.
Recommended Print Dimensions: 78x35x19mm
Here's the recommended Cura settings that have worked for the designer's test print using the following: Ender 3 (printer), Hatchbox 1.75 PLA. Please note that these settings print very slow, but... [click here for more] |
Fishwife Games |
$0.75
|
Realm of the Mountain King wall with geared lever and gem like found in DDO to open doors or activate effects. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Rustic Wooden Chair (STL 3D Printing Model Files)
This stl file features a rustic wooden chair that goes nicely with our rustic wooden table. Perfect for fantasy settings, pirate lairs, isolated cabins, etc. Dimensions are: 14x12x25mm ... [click here for more] |
Fishwife Games |
$0.75
|
Secret rotating starship door. Print at .1-.2 with 0-10% infill ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
SMUGGLER CRATE (3D Printing File- 28mm Gaming Miniatures)
This inexpensive STL file provides you with a printable high tech crate for your 28mm space opera miniatures. Designed to be a smuggler's crate, this object could also be used as a space marine footlocker as well as a general container for various sci-fi, cyberpunk, and mutant wasteland settings.
Default... [click here for more] |
Fishwife Games |
$0.75
|
Very Basic Treasure Chest (3d Printing STL File)
This file is a simple, easy to print treasure chest that is kept intentionally very basic in design. Purposefully generic in appearance to allow mass placement or to add whatever post printing details you desire. Good fro many settings- from fantasy to pirate to modern.
Pay as you want- suggested selling price if you wish to pay is... [click here for more] |
Fishwife Games |
Pay What You Want
|
A basic set of three different 3D Printable (STL) Anatomy Dice to enhance gameplay experience.
D8: Head, Torso, Left Arm, Right Arm, Left Leg, Right Leg.
D10: Head, Torso, Left Arm, Right Arm, Left Leg, Right Leg, Tail.
D12: Head, Torso, Left Arm, Right Arm, Left Leg, Right Leg, Left Wing, Right Wing.
... [click here for more] |
Spiral Lane Productions |
$9.00 $0.79
|
Spike Trap 2 (3D Print STL File) A set of spikes protruding out of a stone base. Though most commonly found in dungeons this could also be used for mad science lairs or other similar themes. Default Dimensions: 30x30x18mm Recommended Cura Settings:
Layer Height: 0.06mm Wall Thickness: .8mm Top Thickness: .6mm (10 layers) Bottom Thickness: .6mm (10 layers) Horizontal Expansion:... [click here for more] |
Fishwife Games |
$0.80
|
MAD SCIENCE: Fermatizer (3D Printing STL File)
So you're getting an adventure ready for a Saturday night session and you need to flesh out the lair for that mad scientist character... What you gonna fill it with?
The Fermatizer is the fourth product of a series of weird tech items that can be printed up on a 3d printer. Though the mad scientist lair is in mind, this piece can also be easily used... [click here for more] |
Fishwife Games |
$0.85
|
The Necroplex Dice Tower, a towering bastion of industrial decay and randomness! Prints in two parts, no supports needed, and small print bed friendly.
The top chimney is sized to fit a standard D20, or remove the top to roll fistfulls of dice at once.
... [click here for more] |
Hack Shack Games |
$0.95
|
Expand your Starship deck plans with this standing controls tile, suitable for use with 28-32mm miniatures. Compatible with other 2nd Dynasty tiles or any other OpenLOCK-compatible tiles.
Compatible with the OpenLOCK system created by and available at Printable Scenery. Important! You will need the basic OpenLOCK templates to print clips to connect these products, available free... [click here for more] |
2nd Dynasty |
$0.97
|
Fifth edition has changed the rules for spell cone area of effect, the templates we used for previous editions no longer work. "A cone extends in a direction you choose from its point of origin. A cone's width at a given point along its length is equal to that point's distance from the point of origin." Any square more then half in this area is affected by the spell. Simple to describe - not so simple... [click here for more] |
3DModels |
$0.99
|
3D Print File: Atomic Cactus
You stumble across the arid wasteland, pausing only to catch your breath and pray for a source of water. Finally, just as you are considering giving in and letting the two headed vultures feast, you spot it... a grouping of large, malformed cacti off in the distance. Your needs for liquid refreshment may be met yet... As you race towards the cacti you... [click here for more] |
Fishwife Games |
Pay What You Want
|
Log In 
